SignalLED Range of RGB LED Signs For Studios
The SignalLED range of illuminated RGB LED signs are a new range of signs designed for outside recording, on-air & production studios, meeting rooms, conference rooms and for fixed installations. The sign itself contains the control electronics, and RGB LEDs are used, so the signs can be simply configured onsite for your particular requirements.
- Low power consumption, only 4W.
- Maintenance free, LED lighting.
- Multi-coloured RGB LEDs offering 9 different colours.
- Sign can be made to flash, pulse, fade and be on or off.
- Flush-mounting as standard or end/ceiling-mounting with kits.
- 20cm (8”) or 40cm (16”) widths or 2 x 20cm (2 x 8”).
- Standard wording includes: MIC LIVE, ON AIR, RECORD, PHONE, TRAFFIC FLAG ON, AD BREAK, TX, REH, REHEARSAL, DOOR, OBIT, NO ENTRY, EXIT, SILENCE PLEASE, MEETING IN PROGRESS, INTERVIEW IN PROGRESS.
- Custom signs can be etched with company logos, different wording or graphics.
- 2 x GPIs for control from a light switch, or fader GPO (pull down to 0V).
- Supplied as standard as red/green switching.
- Use separate remote control (LD-RPC) to program the colour, switching mode or brightness.
- Supplied complete with fixings & DC power supply.
Single Flush Mounting Signs (20cm)
|LD-20F1REC||Single Flush Mounting 20cm ‘RECORD’ Sign||more >>|
|LD-20F1ONA||Single Flush Mounting 20cm ‘ON AIR’ Sign||more >>|
|LD-20F1MCL||Single Flush Mounting 20cm ‘MIC LIVE’ Sign||more >>|
Single Flush Mounting Signs (40cm)
|LD-40F1REC||Single Flush Mounting 40cm ‘RECORD’ Sign||more >>|
|LD-40F1ONA||Single Flush Mounting 40cm ‘ON AIR’ Sign||more >>|
|LD-40F1MCL||Single Flush Mounting 40cm ‘MIC LIVE’ Sign||more >>|
|LD-40F1PHN||Single Flush Mounting 40cm ‘PHONE’ Sign||more >>|
|LD-40F1TRF||Single Flush Mounting 40cm ‘TRAFFIC FLAG ON’ Sign||more >>|
|LD-40F1ADB||Single Flush Mounting 40cm ‘AD BREAK’ Sign||more >>|
|LD-40F1REH||Single Flush Mounting 40cm ‘REHEARSAL’ Sign||more >>|
|LD-40F1DOR||Single Flush Mounting 40cm ‘DOOR’ Sign||more >>|
|LD-40F1OBT||Single Flush Mounting 40cm ‘OBIT’ Sign||more >>|
|LD-40F1NOE||Single Flush Mounting 40cm ‘NO ENTRY’ Sign||more >>|
|LD-40F1EXIT||Single Flush Mounting 40cm ‘EXIT’ Sign||more >>|
|LD-40F1SIL||Single Flush Mounting 40cm ‘SILENCE PLEASE’ Sign||more >>|
|LD-40F1MET||Single Flush Mounting 40cm ‘MEETING IN PROGRESS’ Sign||more >>|
|LD-40F1INT||Single Flush Mounting 40cm ‘INTERVIEW IN PROGRESS’ Sign||more >>|
Twin Flush Mounting Signs (2x20cm)
|LD-40F2TX-REH||Twin ‘TX’ & ‘ REH’ sign||more >>|
|LD-40F2ONA-MCL||Twin ‘ON AIR’ & ‘MIC LIVE’ sign||more >>|
|LD-40F2ONA-SIL||Twin 'ON AIR & 'SILENCE'||more >>|
|LD-40F2MCL-PHN||Twin ‘MIC LIVE’ & ‘PHONE’ sign||more >>|
|LD-KE1||End Mounting Kit For 40cm Or 20cm Flush Mounting Signs||more >>|
|LD-KC1||Ceiling Mounting For 40cm Or 20cm Flush
|LD-IT||LED Sign End Mounting Installation Tool||more >>|
|LD-RPC||Remote Programming Controller||more >>|
RGB LEDs - Any Colours Possible
The illuminating LEDs in the unit are RGB meaning that the colour of the sign can be selected on installation. As standard, the sign will illuminate in defined colours when control inputs 1 and 2 are used, but you can configure the sign to display one of 9 colours using the LD-RPC remote controller: white, green, red, brick red, blue, yellow, orange, cyan and magenta. The images on the following pages show the default colour of each sign.
Dual Control Inputs
The sign can be controlled by either, or both, of 2 pull-low inputs, e.g. a single input can be used to control a single ‘MIC LIVE’ sign, or 2 inputs can be used to control a twin ‘TX’ and ‘REH’ sign with independent control of each side of the sign.
Different Display Modes
Five modes of illumination are available:
- Constant illumination.
- Flashing, regularly on/off.
- Pulsing - flashing, then off, repeated
Single or Twin Signs
Each sign is 40cm or 20cm long. The 40cm signs can be split into two 20cm sides which can be separately, or jointly controlled, e.g. you can have a 40cm ‘ON AIR’ sign, or twin 2 x 20cm signs, such as ‘ON AIR’ and ‘MIC LIVE’.
Flush or End Mounting
The sign is supplied as standard so that it can be mounted flush to a wall, e.g. for the ‘TX’ & ‘REH’ sign shown. However, a mounting kit is available, LD-KE1, to mount the sign perpendicular to a wall, e.g. above a door, such as the ON AIR sign shown.
Single 20cm Flush Mounting Sign
These are the available choices for the smaller 20cm flush-mounting signs. Custom signs can be made to order, if required.
Although a range of standard signs is supported, custom signs, for example with your company name or logo, can be produced for a nominal setup fee. Contact Sonifex with your requirements.
If wish to supply your own artwork for the custom sign, please read the Customer Supplied Sign Artwork Specification >.
How to Order
Just select the name of the sign from the list above.
The signs are supplied with a 6V wall-wart power supply with international adapters for the UK, Europe, USA and Australasia & a 5m lead. Simply wire up your control signal(s) and DC input to the ‘screw terminal block’ inside the sign, route the cables through the integral cable clamp and mount the unit on the wall.
LD-IT An installation tool, the LD-IT can be used to hold the sign in place on the wall mount whilst you wire it up.
Technical Specification For SignalLED Range
|Input Connector:||4 way screw terminal block|
|Control Inputs:||2 x pull-down to 0V|
|Perspex Sign Dimensions:||Single: 40cm (W) x 8cm (H)|
Preisstellung: Terms & Conditions:
Abholpreise in CHF (Schweizer Franken), Nettopreis, per Stück/Paar/Set, inkl. 7,7 % MwSt., Franko Dietikon (Schweiz). Zuzüglich allfällige Verpackungs & Versandkosten. Preis- und Produkteänderungen bleiben vorbehalten! Konditionen und Mengenrabatte auf Anfrage. Garantie 24 Monate bring-in/take-out exkl. Verschleissteile. Händlerkonditionen auf Anfrage.
Indicated prices are in CHF (Swiss Francs). ex works Dietikon Switzerland. Special net prices and terms, dealer and export prices are quoted in short notice. Please send email to email@example.com